Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors TAPING Philips radial, solid and non-solid aluminium electrolytic capacitors in sizes up to D = 16 mm, are available in taped version corresponding to "IEC 286-2" or "JIS C 0805" respectively. They are most suitable for use on automatic insertion machines, mounting robots or cutting and forming equipment and are supplied in box (ammopack). CAUTION Packages must be handled with care to avoid bent leads For catalogue numbers, refer to the relevant detail specification in this data handbook. The information contained within this part is valid for the following series: * RLC 013 * RSP 036 * RB 036 92 * RBA 036 93 * RLL 116. P handbook, full pagewidth P2 p OD h p h A H1 F P1 O d 2.5 max 1.5 max H 11 max 9 0.5 6 min 18 0.5 A MBC519 4 0.2 1 max 12.7 0.3 (1) 0.9 max detail A Dimensions in mm. Form TNA: case D x L = 5 x 11 mm; F = 2.5 mm. Form TFA: case D x L = 8.2 x 11 mm; F = 5 mm. For dimensions see Table 1. (1) Tolerance over any 20 pitches: 1.0 mm. Fig.1 Capacitors on tape, straight leads. 1996 Dec 03 1 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors handbook, full pagewidth P1 H0 MBC520 Dimensions in mm. Form TFA: case D x L = 5 x 11 mm; F = 5 mm. For dimensions see Table 1. Fig.2 Capacitors on tape, formed leads. Table 1 Dimensions of capacitors on tape; see Figs 1 and 2 NOMINAL CASE SIZE (D x L) in mm FORM TNA: F = 2.5 mm FORM TFA: F = 5 mm PARAMETER 5 x 11 (straight leads) (mm) 5 x 11 (formed leads) (mm) 8.2 x 11 (straight leads) (mm) TOLERANCE D 5.5 5.5 8.7 max. A 12 12 12 max. d 0.5 0.5 0.6 0.05 P 12.7 12.7 12.7 1.0 P1 5.1 3.85 3.85 0.7 P2 6.35 6.35 6.35 0.7 F 2.5 5.0 5.0 +0.6/-0.1 h 0 0 0 2.0 p 0 0 0 1.3 H 18 18 18 +1.5/-0 H0 - 16 - 0.5 H1 32 32 32 max. 1996 Dec 03 2 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors Series RLC 013, RSP 036, RB 036 92, RBA 036 93 and RLL 116 (continued) QUANTITIES PER PACKAGING UNIT Table 2 Number of capacitors per packaging unit NOMINAL CASE SIZE (D x L) (mm) CASE CODE BULK PER BOX TAPED AMMOPACK(1) FORM CA FORM CB FORM TFA FORM TNA 5 x 11 11 1000 1000 2000 2000 8.2 x 11 13 1000 1000 1000 1000 Note 1. Ammopack taping (Form TFA) case D x L = 8.2 x 11 mm. To ensure optimum straightness of the leads and correct position of the capacitors in the folding area of the zig-zag shaped tape, every 25th capacitor is omitted. 54 max. 340 max. handbook, full pagewidth 305 max. CCA414 Dimensions in mm. Fig.3 Ammopack; Forms TFA and TNA. 1996 Dec 03 3 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors The information contained within this part is valid for the following series with a case D = 3 to 8 mm: * RLP 5-134 * RLP 7-097 * RSM 037 * RSH 044 * RLI 135. For catalogue numbers, refer to the relevant detail specification in this data handbook. P handbook, full pagewidth P2 p OD p h h A H1 F P1 O d 2.5 max 1.5 max H 11 max 9.0 0.5 12.5 max 18 0.5 1.0 max 4 0.2 12.7 MBC523 0.3 1) 0.9 max detail A Dimensions in mm. Form TNA: Case D x L = 5 x 11 mm; F = 2.5 mm (leads slightly bent). Case D x L = 6.3 x 11 mm; F = 2.5 mm. Case D x L = 8 x 12 mm; F = 3.5 mm. For dimensions see Table 3. (1) Tolerance over any 20 pitches: 1.0 mm. Fig.4 Capacitors on tape, straight leads. 1996 Dec 03 A 4 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors handbook, full pagewidth P1 H0 MBC524 Dimensions in mm. Form TFA: F = 5 mm. Case D x L = 5 x 11, 6.3 x 11 and 8 x 12 mm. For dimensions see Table 3. Fig.5 Capacitors on tape, formed leads. Table 3 Dimensions of capacitors on tape; see Figs 4 and 5 NOMINAL CASE SIZE (D x L) in mm FORM TNA PARAMETER FORM TFA TOLERANCE 5 x 11 (mm) 6.3 x 11 (mm) 8 x 12 (mm) 5 x 11 (mm) 6.3 x 11 (mm) 8 x 12 (mm) D 5.5 6.8 8.5 5.5 6.8 8.5 13 13 max. A 12.5 12.5 12.5 12.5 d 0.5 0.6 0.6 0.5 0.6 0.6 0.05 max. P 12.7 12.7 12.7 12.7 12.7 12.7 1.0 P1 5.1 5.1 4.6 3.85 3.85 3.85 0.7 P2 6.35 6.35 6.35 6.35 6.35 6.35 1.0 F 2.5 2.5 3.5 5.0 5.0 5.0 +0.8/-0.2 h 0 0 0 0 0 0 2.0 p 0 0 0 0 0 0 1.3 H 18.5 18.5 20 18.5 18.5 20 0.75 H0 - - - 16 16 16 0.5 H1 32.2 32.2 32.2 32.2 32.2 32.2 max. 1996 Dec 03 5 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors Series RLP 5-134, RLP 7-097, RSM 037, RSH 044 and RLI 135, D = 3 to 8 mm (continued) P handbook, full pagewidth P2 OD p p F P1 h A H1 O d 1.5 max 1.5 max H H0 9.0 11 0.5 max 6.0 18 min 0.5 1.0 max 4 0.2 Dimensions in mm. Form TFA. Height = 5 to 7 mm. For dimensions see Table 4. (1) Tolerance over any 20 pitches: 1.0 mm. 12.7 0.3 A MBC581 1) 0.9 max detail A Fig.6 Capacitors on tape. Table 4 Dimensions of capacitors on tape; see Fig.6 NOMINAL CASE SIZE (D x L) in mm PARAMETER D A d P P1 P2 F h p H H0 H1 1996 Dec 03 FORM TFA 3x5 (mm) 3.5 x 5 (mm) 4x5 (mm) 5x5 (mm) 6.3 x 5 (mm) 4x7 (mm) 5x7 (mm) 6.3 x 7 (mm) 7x7 (mm) 3.5 6.0 0.4 12.7 5.1 6.35 2.5 0 0 17.5 16 32.2 4.0 6.0 0.4 12.7 5.1 6.35 2.5 0 0 17.5 16 32.2 4.5 6.0 0.45 12.7 3.85 6.35 5.0 0 0 17.5 16 32.2 5.5 6.0 0.45 12.7 3.85 6.35 5.0 0 0 17.5 16 32.2 6.8 6.0 0.45 12.7 3.85 6.35 5.0 0 0 17.5 16 32.2 4.5 8.0 0.45 12.7 3.85 6.35 5.0 0 0 17.5 16 32.2 5.5 8.0 0.45 12.7 3.85 6.35 5.0 0 0 17.5 16 32.2 6.8 8.0 0.45 12.7 3.85 6.35 5.0 0 0 17.5 16 32.2 7.5 8.0 0.45 12.7 3.85 6.35 5.0 0 0 17.5 16 32.2 6 TOLERANCE max. max. 0.05 1.0 0.7 1.0 +0.8/-0.2 2.0 1.3 0.75 0.5 max. Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors QUANTITIES PER PACKAGING UNIT Table 5 Number of capacitors per packaging unit NOMINAL CASE SIZE (D x L) (mm) CASE CODE 3x5 BULK PER BOX TAPED AMMOPACK FORM CA FORM TFA FORM TNA 51 3000 3000 - 3.5 x 5 52 3000 3000 - 4x5 53 2000 2000 - 5x5 54 2000 2000 - 6.3 x 5 55 2000 2000 - 4x7 71 2000 2000 - 5x7 72 1000 2000 - 6.3 x 7 73 1000 2000 - 7x7 74 1000 1000 - 5 x 11 11 3000 2000 2000 6.3 x 11 12 2000 2000 2000 8 x 12 13 1000 1000 1000 54 max. 340 max. handbook, full pagewidth 305 max. CCA414 Dimensions in mm. Fig.7 Ammopack; Forms TFA and TNA. 1996 Dec 03 7 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors The information contained in this part is valid for the following series with a case D = 10 to 16 mm: * RSM 037 * RML 048 * RSH 044 * RLI 135 * RSL 046 * RVI 136 * RMS 047 * RHT 165. For catalogue numbers, refer to the relevant detail specification in this data handbook. P handbook, full pagewidth P2 h OD h A H1 P1 F O d 1.5 max H 9 0.5 12 min 4 0.2 1.5 max 12.7 18 0.5 0.3 1) 0.9 max detail A Dimensions in mm. Case D = 10 mm. For dimensions see Table 6. (1) Tolerance over any 20 pitches: 1.0 mm. Fig.8 Capacitors on tape. 1996 Dec 03 A 8 MBC525 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors P2 handbook, full pagewidth P2 P P P1 P1 MAM158 D = 12.5 mm. D = 16 mm. Case D = 12.5 and 16 mm. For dimensions see Table 6. Fig.9 Capacitors on tape. Table 6 Dimensions of capacitors on tape; see Figs 8 and 9 NOMINAL CASE SIZE (D x L) in mm PARAMETER 10 x 12 (mm) 10 x 16 (mm) 10 x 20 (mm) 12.5 x 20 12.5 x 25 (mm) (mm) 16 x 20 (mm) 16 x 25 (mm) 16 x 31 (mm) TOLERANCE D 10.5 10.5 10.5 13.0 13.0 16.5 16.5 16.5 max. A 13.5 17.5 22 22 27 22 27 33.5 max. d 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.05 P 12.7 12.7 12.7 25.4 25.4 25.4 25.4 25.4 1.0 P1 3.85 3.85 3.85 3.85 3.85 8.95 8.95 8.95 0.7 P2 6.35 6.35 6.35 6.35 6.35 12.7 12.7 12.7 1.3 F 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 +0.8/-0.2 h 0 0 0 0 0 0 0 0 3.0 H 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 0.75 68 75 max. H1 = H + A H1 B 1996 Dec 03 54 62 62 62 68 9 68 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors Series RSM 037, RSH 044, RSL 046, RMS 047, RML 048, RLI 135, RVI 136 and RHT 165 with a case D = 10 to 16 mm (continued) QUANTITIES PER PACKAGING UNIT Refer to the relevant detail specification in this data handbook. B max. 340 max. handbook, full pagewidth 310 max. CCA429 Dimensions in mm. For dimension B, see Table 6. Fig.10 Ammopack; Form TFA. Note 1. Ammopack taping (Form TFA). To ensure optimum straightness of the leads and correct position of the components in the folding area of the zig-zag shaped tape, where necessary, one capacitor is omitted at each folding edge. 1996 Dec 03 10 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors The information contained within this part is valid for the following series: * SAL-RP 122 * SAL-RPM 128. For catalogue numbers, refer to the relevant detail specification in this data handbook. T handbook, full pagewidth P2 h Wb P P1 0.5 max Od 0.2 max H1 H 11 max 6 0.5 9.0 0.5 0.2 18 0.5 A MBC574 4 0.2 0.2 1) F 12.7 Dimensions in mm. Maximum height = 9.5 or 12.5 mm. For dimensions see Table 7. direction of tape transport for Form TR+ (positive leading). (1) Tolerance over any 20 pitches: 1.0 mm. 0.9 max detail A Fig.11 Capacitors on tape. Table 7 Tape dimensions (in mm) for solid radial capacitors; see Fig.11 SAL-RP 122 MAX. HEIGHT 12.5 mm SAL-RPM 128 MAX. HEIGHT 9.5 mm CASE CODE CASE CODE PARAMETER TOLERANCE 1 2 3 4 10 20 30 40 50 60 T 3.5 4.5 5.0 6.0 3.0 3.5 4.0 5.0 5.0 6.0 max. Wb 8.0 8.0 8.0 8.0 7.0 7.0 7.0 7.0 8.0 8.0 max. d P 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 +0.02/-0 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 1.0 P1 3.85 3.85 3.85 3.85 3.85 3.85 3.85 3.85 3.85 3.85 0.7 P2 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 1.0 F 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 0.2 h 0 0 0 0 0 0 0 0 0 0 1.0 H 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 0.75 H1 32 32 32 32 28 28 28 28 28 28 max. 1996 Dec 03 11 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors Table 8 Ammopack dimensions for the relevant case codes PARAMETER Case code SAL-RP 122 SAL-RPM 128 Amax (mm) Bmax (mm) 1 and 2 10; 20 and 30 340 266 3 and 4 40; 50 and 60 340 176 52 max. A handbook, full pagewidth B CCA430 Dimensions in mm. PREFERRED PACKING. For dimensions see Table 8. Fig.12 Ammopack; Form TFA. 1996 Dec 03 12 Philips Components Packaging Radial Electrolytic Capacitors Electrolytic Capacitors handbook, full pagewidth 4 30 77 85.6 355 5 22 3 3 1 = capacitor. 2 = tape. 3 = paper. 4 = flange. 5 = cylinder. 1 MBC573 42 2 52 Dimensions in mm. Fig.13 Reel; Form TR+. QUANTITIES PER PACKAGING UNIT Table 9 Number of capacitors per packaging unit CASE SIZE Hmax x Wmax x Tmax (mm) BULK PER BOX CASE CODE TAPED PER REEL TAPED PER BOX FORM CA FORM CB FORM TR+ FORM TFA 12.5 x 8.0 x 3.5 1 1000 1000 2000 2000 12.5 x 8.0 x 4.5 2 1000 1000 2000 2000 12.5 x 8.0 x 5.0 3 1000 1000 1000 1000 12.5 x 8.0 x 6.0 4 800 1000 1000 1000 9.5 x 7.0 x 3.0 10 1000 1000 2000 2000 9.5 x 7.0 x 3.5 20 1000 1000 2000 2000 9.5 x 7.0 x 4.0 30 1000 1000 2000 2000 9.5 x 7.0 x 5.0 40 1000 1000 1000 1000 9.5 x 8.0 x 5.0 50 1000 1000 1000 1000 9.5 x 8.0 x 6.0 60 1000 1000 1000 1000 1996 Dec 03 13